Microsonic bks+6/FIU Bedienungsanleitung PDF herunterladen

Operating Instructions

bks+6/FIU

Ultrasonic web edge sensor with

analogue output and

IO-Link interface

Technical data

fork width 60 mm

fork depth

working range

transducer frequency

resolution

73 mm

≥ 40 mm (± 20 mm)

ca. 310 kHz

0.02 mm

reproducibility

operating voltage U

voltage ripple

no-load current consumption

± 0.1 mm

20 to 30 V DC, reverse polarity protection

± 10 %

≤ 60 mA

housing

class of protection to EN 60 529

zinc die cast chromed, plastic parts: PBT

ultrasonic transducer : polyurethane foam,

epoxy resin with glass contents

IP 65

type of connection

controls

indicators

5-pin M12 initiator plug,

brass, nickel-plated

Teach-in-button

LED green: center or within switching window

programmable

synchronisation

operating temperature

LEDs yellow: deviation from centre/switching window

LCA-2 with LinkControl

internal synchronisation up to 10 sensors

+5°C to +60°C

storage temperature

weight

response time

repetition rate

-40°C to +85°C

280 g

6 ms

4 ms

time delay before availability

order no.

analogue output

< 300 ms

bks+6/FIU

current output 4-20 mA

voltage output 0-10 V

switched output

short-circuit-proof, switchable rising/falling

Push-Pull, U

-4V, -U

+2 V, I

max

= 100 mA

switchable NOC/NCC; short-circuit-proof

24.5 39.75 33.25

97.5

14.15

4.2

M12x1

23.5

zero position mark

1 Push-Pull switched output and analogue output

-U

Sync/Com

I/U

Sensor adjustment with Teach-in procedure

2-point adjustment

Completely free the fork from

the web material.

Press push-button for ca. 3 s

until the LED »0» and LED »+«

flash simultaneously.

Wait for 10 s, until LED »0« and

LED »+« flash mutually.

Cover the sound path com-

pletely with web material.

1-point adjustment

Align the web edge inside the

fork with the mark to obtain a 50

% coverage of the sound path.

Press push-button for ca. 6 s,

until the LED »0« and LED »-«

flash simultaneously.

Set analogue output

Lock push-button

Turn supply voltage OFF.

While pressing the push-button

turn supply voltage ON

Press push-button for ca. 13 s

until the LED »0« and LEDs

»+«/»-« flash simultaneously.

LED »0«:

The function of

the analogue

output is

displayed:

flashes

LED »+« on, LED »-«

on: 0-10 V, rising

LED »+« on, LED »-«

off: 0-10 V, falling

LED »+« off, LED »-«

on: 4-20 mA, rising

LED »+« off, LED »-«

off: 4-20 mA, fallin

Keep push-button pressed for ca.

3 s

, until LED »0« and LED »+«

simultaneously flash quickly.

LED »0«:

LED »-«:

LED »+«:

flashes

off

on: push-button

active

off: push-button

locked

Factory setting

Turn supply voltage OFF.

While pressing the push-button

turn supply voltage ON

Keep push-button press for

ca. 13 s

, until the LED »0«

flashes quickly.

Release push-button within

10s

, whilst supply voltage

is ON.

Press push-button for ca. 1 s.

Normal mode operation

To change output function press

push-button for ca. 1 s

Wait for 10 s.

Normal mode operation

To change setting press

push-button for ca. 1 s

Wait for 10 s.

ware.

The bks+6/FIU sensors are IO-Link-ca-

pable in accordance with IO-Link

specification V1.1.

 Via the Teach-in button on the

edge sensor’s top or via Pin 5 on

the device plug, the sensor can

be adjusted to the material to be

controlled.

 Choosing between rising and

falling output characteristic is

possible.

 Three LEDs indicate the position

of the web material inside the

fork.

Safety Notes

 Read the operating instructions

prior to start-up.

 Connection, installation and ad-

justment works may only be car-

ried out by expert personnel.

 No safety component in ac-

cordance with the EU Machine

Directive.

Installation

 Mount the sensor at the installa-

tion site.

 Connect a connection cable to

the M12 device plug.

Start-Up

 Connect the power supply.

 Carry out the adjustment to the

web material in accordance with

the diagram.

Product Description

The bks+ ultrasonic web edge sensor

is a fork sensor for scanning the

edges of sound-impermeable and

slightly sound-permeable materials

such as foil or paper.

The fork’s lower leg is equipped with

an ultrasonic sensor which cyclically

emits short sound impulses, which

are detected by the ultrasonic

receiver accommodated in the upper

fork leg. Material immersing into the

fork covers this sound path and thus

attenuates the receive signal, which is

evaluated by the internal electronics.

An analogue signal and a binary

value via IO-Link is output in depen-

dence of the coverage degree.

The bks+6/FIU optional can be pro-

grammed using the LinkControl-

Adapter LCA-2 and LinkControl soft-

Synchronisation

If two or more edge sensors are

mounted in a distance < 50 mm the

internal synchronisation should be

used. Connect Sync-channels (Pin 5

at the units receptacle) of all sensors.

Factory setting

 Analogue output on voltage out-

put

 Rising analogue characteristic

(0 V at maximum coverage)

 Switched output on NOC

 Switched output window is

± 4,5 mm around zero position.

Maintenance

microsonic sensors are maintenance-

free. With heavy dirt deposits, we re-

commend a cleaning of the white

sensor surface.

Ultrasonic Sensors

Adjust sensor to web edge

Further settings

or connect Pin 5 (Sync/Com) to +U

or connect Pin 5 (Sync/Com) to -U

or disconnect Pin 5 (Sync/Com) from -U

1 2

Ultrasonic Sensors 1
*B10349* 2

Inhaltsverzeichnis

Seite 1 - Ultrasonic Sensors

Operating Instructionsbks+6/FIUUltrasonic web edge sensor with analogue output and IO-Link interfaceTechnical datafork width 60 mmfork depthworking r

Seite 2 - *B10349*

Kommentare zu diesen Handbüchern

Keine Kommentare

Microsonic bks+6/FIU Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Sensoren Microsonic bks+6/FIU herunter. Microsonic bks+6/FIU User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sensoren Microsonic bks+6/FIU